Copyright 2008 Simon’s Competition, Inc.

Simons Competition

100 Central Ave.

Fairless Hills, Pa.

19056 U.S.A.

 

Phone

 215-269-5010

 

Fax

 215-269-5011

home  about us  products  services  dyno-tuning  machine shop  drag-racing

performance kits  racing school  photos  sponsorship  links  contact us

SIMON’S Competition offers a full line of products available for your Street or Strip Harley-Davidson.  Parts available from just about every manufacturer.

 

We also manufacture some of our own performance parts.  Our performance parts are exclusive and have been through extensive research & development to offer you the very best.

 

If you need something you don’t see here, please contact us for the latest pricing & availability.

PRO-PRIMARY PLATE

The Simon’s Competition “Pro-Primary Plate” can be seen on many race bikes.  This tried & true performance product is a must for anyone running a Sportster engine with an open belt primary drive.  Utilizes the stock H-D clutch release mechanism, and removable spider for easy clutch access.  Provision for air shifter cylinder on the top of plate.  CNC machined from billet aluminum to exact specifications.  Picture shown with SIMON’S aluminum shifter.  As used on Andy’s Record setting Street-Pro.

SP1 BACKBONE KIT (Weld In)

NEW from Simon’s Competition, is this weld in backbone for Sportster frames.  This awesome new product from Simon’s is bent at just the right points to give you the perfect backbone for your Sportster chassis.  This is a must for anyone running a big inch “tall” Sportster engine.  Gives you plenty of clearance for the taller engines.  Just cut out the stock backbone section and weld this one in.  This is the same backbone design that Andy installed on his Record setting Street-Pro.

SIMON’S REVERSED TRIPLE TREE SET

Now available from Simon’s Competition, is this trick new billet aluminum triple tree set.  This triple tree set allows you to get more weight forward by moving the front wheel back.  Get the right weight balance on your race bike, and fine tune it with the height adjustment. 

SIMON’S “SURE SHIFT” BILLET SHIFTER

When was the last time you or someone you know broke a shifter, lost the round, and had to go home?  This cool NEW product from Simon’s is a must have for all race bikes.  Eliminate broken shifters.  These trick new billet shifters feature a  provision to bolt up your air shifter cylinder.  They come with a knurled foot peg, and slide right onto the stock splined shifter shaft.  Picture shown is polished, when sent they are in a bead blast finish.  If you break & go home… you will wish you had one of these!  Call. 

PRIMARY ACCESS MODIFICATION

NEW from Simon’s Competition, is this modification to the primary cover.  This modification allows you to accurately time the engine, and turn the engine over with out having to remove the primary cover.  Comes with a cover plate to close the hole when finished with your adjustments.  This is a major time saver at the race track, not to mention the elimination of the oily mess and chance of ruining the primary gasket.  Really nice product!

CARBON FIBER WHEELS

Now available from Simon’s Competition, are the super-lightweight ultra trick Carbon Fiber Wheels.  These wheels offer tremendous weight savings over lightweight aluminum race wheels.  These are the same wheels that were seen on Charlie Cannon’s 9 second Hot Street bike at the end of the 2007 season in Las Vegas!

CUSTOM ALUMINUM FUEL TANKS

Simon’s Competition now offers custom made aluminum fuel tanks.  These tanks are custom made by Andy himself, and are made to fit your motorcycle.  Fuel tank filler bung, and all fittings installed on the tank for a simple, clean set-up.  Andy has made these tanks for many different racers on the circuit.  Call and schedule your tank to be made today. 

CUSTOM FRONT ENGINE SPROCKETS

If you are looking for a certain primary drive ratio… look no further.  Simon’s Competition offers custom made front engine sprockets to suit your application and desired primary drive ratio.  Just specify the number of teeth you want along with the type of sprocket shaft you are using.  Shown is a Sporster front drive sprocket for the Big-Twin sprocket shaft.  Call Today!

CUSTOM ALUMINUM PANELS

Simon’s Competition now offers custom made aluminum panels for your race bike.  These panels are custom made by Andy himself, and are made to fit your motorcycle.  Panels are attached by buttons for easy access to electrical components.  They give your race bike a clean, sleek, professional look to feature your sponsors.  Andy has made these panels for many different racers on the circuit.  Call and schedule your panel set to be made today. 

CUSTOM ALUMINUM OIL TANKS

Simon’s Competition now offers custom made aluminum oil tanks.  These tanks are custom made by Andy himself, and are made to fit your motorcycle.  Oil tank filler bung, and all fittings installed on the tank for a simple, clean set-up.  Made to clear the front tire, and designed to work properly.  Andy has made these tanks for many different racers on the circuit.  Call and schedule your tank to be made today. 

SIMON’S “CASE SAVER” BROKEN PRIMARY LIP RING

This cool product from Simon’s can save you hundreds!  If you have a broken primary lip on your cases, you no longer need to throw away the cases.  The “Case Saver” is a CNC machined steel replacement for the stock aluminum lip.  We frequently install this product on brand new cases to prevent a broken set of cases later on.  You can purchase the Case Saver rings by themselves, or you can send your case half to us, and we will install the Case Saver with a ONE DAY TURNAROUND!!!

SIMON’S “STREET-PRO” SWINGARM

The “Street-Pro” swingarm from Simon’s Competition is one of the strongest swingarms we have ever seen.  Not only is it strong, buts lighter than most aluminum swingarms.  Hand made by Andy Simon himself, these are the same swingarms as Andy uses on his Record Setting Street-Pro motorcycle.  If you want the best, then this is it.  Call and order yours today.

SIMON’S PHENOLIC INTAKE SPACER

NEW from Simon’s Competition is this 1” thick phenolic spacer for the S&S intake manifold.  Reduce the heat to your carburetor with this cool new spacer and stop throwing away horsepower.  The spacer is CNC machined from phenolic material to reduce heat transfer.  Phenolic spacers also available for the S&S super E & G manifolds.  Call Today!

SIMON’S THROTTLE STOP KIT

NEW from Simon’s Competition is this Throttle Stop kit.  CNC machined from billet aluminum.  This HOT NEW product will give index racers the edge they need to be more consistent and win more races.  The Simon’s Competition Throttle Stop is part of a new contingency sponsorship agreement with the AHDRA National Tour in 2008.  This product is taking the index classes by storm in 2008, call and order yours today!  Don’t let the competition leave you behind!!!